Ridgid Tools
Ridgid 1224 Power Threading Machine features:
- Threads 1/4-2 pipe at 36 RPM and 2-1/2-4 at 12 RPM
- The 1224 threads a wide range of pipe including
black, galvanized and plastic-coated pipe, together with
stainless steel, IMC and heavy-wall conduit, as well as
rod up to 30 Rockwell C.
- An induction motor helps insure sounds levels well
within the limits set by the regulating authorities
- A special capacitor-start / capacitor-run motor
allows the 1224 to thread a full range of material where
voltage drop is experienced
- 1/4-2 Universal Die Head; 2-1/2-4 receding die head
allows cutting of tapered or straight NPT/NPSM or
BSPT/BSPP threads
- Constant and proper lubrication of dies and
workpiece with through-head oiling
- CSA Approved
- Approved to UL Standards (NRTLC)
Specifications:
- Pipe Capacity: 1/8 - 2 (3 mm - 50 mm)
- Bolt Capacity: 1/4 - 2 (6 mm - 50 mm)
- Motor: 1/2 HP, 115V Universal 25-60 Hz
- Motor Control: Heavy-duty rotary FOR/OFF/REV
with integral foot switch
- Spindle Speed: 38 RPM (52 or 57 RPM
available)
- Chuck: Hammer-type with replaceable,
rocker-action jaw insertsOiling System:
Through-the-head, with integral oil reservoir.
Self-priming, constant-flow, gerotor pump
- Cutter: Model 360, roll-type cut-off,
self-centering, full-floating
- Reamer: Model 344, 1/8 - 2, five flute cone,
right hand only
Includes:
- Model No. 1224 threading machine with foot switch
- (1) No. 714 (914) 2 1/2-4 receding self-opening die
head
- (1) No. 711 (911) 1/4-2 universal self-opening die
head
- (1) set 1/2-3/4 universal alloy dies
- (1) set 2 1/2-4 1224 high speed dies
- (1) set 1-2 universal alloy dies
- (1) gallon Nu-Clear oil
- (3) hex keys
- (1) spare F-229 cutter wheel
- (1) 3/4 combination wrench
- (1) tool box
- (1) No. 744 reamer
- (1) No. 764 cutter
